Component Protection Removal & GEKO Service

Lamborghini interior with green accents, diagnostic laptop displaying vehicle data, highlighting component protection removal and GEKO service for VAG vehicles.

Many modern vehicles come with Component Protection, a security feature designed to prevent unauthorized installations of used control modules. If you replace or install a used module in your Audi, Volkswagen, Bentley, or Lamborghini, it may require Component Protection Removal & GEKO Service to function properly.

Our authorized service ensures that your replacement components integrate seamlessly with your vehicle’s system, restoring full functionality. Using official ODIS software and GRP access, we perform secure GeKo and SVM programming to correctly configure new or used modules.

Service Features:

  • Removal of component protection to enable full module functionality
  • Secure GeKo login and coding
  • SVM programming to match factory settings
  • Official dealer-level diagnostics and software updates

We offer this service remotely, on-site, or at our facility, providing flexible solutions for your needs. Contact us today to restore your vehicle’s performance with expert coding and programming services!

Schedule Your Component Protection Removal & ECU Cloning Service

Ensure your vehicle operates at peak performance with our expert ECU Cloning and Transfer of Data service. Contact us for a consultation or to schedule an appointment.

What Is Component Protection?

Component Protection is VAG’s internal anti-theft system. It locks down key vehicle modules like:

If a module is replaced—new or used—it won’t fully function until it’s matched to the car using GEKO authentication. Features may be disabled, warning lights stay on, and diagnostic tools will flag CP-active errors.

Our GEKO-Based Component Protection Removal Service

We don’t use workarounds or risky hacks. We perform factory-level CP removal using secure GEKO-linked tools and procedures—just like the main dealer, but faster and more flexible. Here’s what we offe:r

✅ GEKO Authorization Access

We’re able to log into VAG’s secured servers to perform authenticated module pairing and CP deactivation.

🔄 Used Module Integration

We re-adapt used OEM parts—MMI units, BCMs, tail lights, clusters, etc.—so they’re fully accepted by your vehicle’s immobilizer system.

🧠 Full Compatibility Checks

Before and after removal, we verify software versions, coding requirements, and function tests to ensure your module works properly.

🚗 Retrofit Support

Upgrading to a better infotainment system or adding LED matrix headlights? CP removal is often the missing link. We handle coding and CP removal as a complete service.

Vehicles & Systems We Support

Audi

MMI 3G/4G units, amplifiers, LED lights, virtual cockpit Common in A4, A5, A6, Q5, Q7, RS3/RS5 models

Volkswagen

MIB infotainment, climatronic panels, rear lights Seen in Golf 7/8, Passat B8, Tiguan, Arteon

Porsche

PCM infotainment systems, clusters, adaptive lighting Panamera, Cayenne, Macan, Taycan models

Bentley

Infotainment, seat modules, control units in Bentayga and Continental GT

Lamborghini

MMI and drive selector modules in Huracán and Urus

❗ Why CP Removal Matters

Failing to remove Component Protection can result in:

Whether you’re replacing a faulty part or upgrading, CP removal is essential to restore full function.

or

to schedule your Component Protection removal. Fast turnaround. Fully compatible results.

❓ FAQ: Component Protection Removal & GEKO Service

Yes. As long as the module is compatible with your vehicle, we can adapt and remove CP using GEKO authorization.

Our process follows factory standards using official GEKO tools. It's fully legal and often what dealerships do—only faster and more cost-effective.

Absolutely. We handle both the CP removal and the required coding/adaptation.

For most modules, it takes 30–90 minutes. Some complex systems may take longer depending on vehicle configuration.

No problem—we can still remove CP and re-adapt the module to your car.

Models We Support

Lamborghini
Murcielago LP640, Gallardo LP550/LP560/LP570,
Huracan LP580/LP610/Performante/Evo/Tecnica/EVO/STO/Super Trofeo,
Aventador LP700/LP720/LP740/LP750 S/SV/SVJ/Ultimate,
Urus S/Performante.

Bentley
Continental GT, Flying Spur, Bentayga.

Audi
A Series, Q Series, Performance Models

Porsche
Macan, Cayenne, Panamera, Taycan, 911

Volkswagen
MQB Platform (Golf, Tiguan, Jetta, Arteon, Passat B8),
PQ35/PQ46 (Golf 5/6, Passat B6, Touran),
MLB Platform (Touareg, Passat CC),
Electric & Hybrid (ID.3, ID.4, GTE models)

Related Products

  • Component Protection Removal service box for Volkswagen featuring a car interior and VAG Programming branding.Read more

    Component Protection Removal for Volkswagen

  • Bentley component protection removal service box featuring VAG Programming branding and Mechatronic Diagnostics LTD logo.Read more

    Component Protection Removal for Bentley

  • Lamborghini component protection removal service package by VAG Programming, featuring a detailed dashboard image with branding and service information.Read more

    Component Protection Removal for Lamborghini

  • Porsche component protection removal service box featuring a detailed car interior display, branded by VAG Programming and Mechatronic Diagnostics LTD.Read more

    Component Protection Removal for Porsche

  • Diagnostics and troubleshooting service box for Audi, featuring VAG Programming branding and a diagnostic tool display inside a vehicle interior.Read more

    Component Protection Removal for Audi

Share the Post:

Related Posts

Need help with VAG programming ?

Contact US
Porsche vehicle interior with technician using laptop for VAG programming services, featuring digital dashboard and control panel.